It is being used to create boluses, accessories that ensure the optimum dose of radiotherapy for cancers close to the surface of the head or neck.
Swansea Bay University Health Board say that not only is this better for patients, but it is also saving radiotherapy staff time, freeing them up to do other important work.
For most types of radiotherapy to the head or neck, patients wear a mask, sometimes called a shell.
It is made of thermoplastic, which is warmed and moulded to follow the exact contours of their skin. The shell holds their head and neck still and in the right position for the most accurate, effective treatment.
However, for some cancers a bolus is required to provide an additional layer during radiotherapy. Previously these were made out of moulded wax and had to be fitted to the mask by hand.
But this was time-consuming and far from perfect as there could be gaps left between the bolus and mask. Now the investment in a 3D printer means the bolus can be created literally at the press of a button.
The idea originally came from advanced radiotherapy physics technologist Rhys Jenkins after he read about it in a professional magazine.
“When the photons used in radiotherapy enter the skin, they do not provide 100 per cent of the dose straight away,” explained Rhys, who is based at the South West Wales Cancer Centre in Singleton.
“Instead, there is a build-up effect. For skin cancer or other superficial head and neck cancers, such as those of the parotid gland, which are close to the skin, this build-up would happen deeper, and we would miss quite a bit of the target with the required dose.
“So, the bolus acts like tissue material. The build-up happens there, so by the time it gets to the patient’s skin it has reached the dosage you want.”
The shape, depth and positioning of the bolus is all designed during the treatment planning stage. Until recently it had to be hand-formed from wax, taking anything up to an hour to make.
However, this could leave air gaps. And as the bolus had to be manually pushed into place, there was no guarantee it was the same shape as that designed on the planning system.
There were other drawbacks too. Sometimes the bolus would be dropped, or the brittle wax would crack, and another would have to be created.
The investment in a 3D printer has changed all that. It was introduced with the support of Swansea Bay’s maxillofacial laboratory team, who have had extensive experience of using 3D technology over many years.
“They helped us decide on what printer to buy and helped us get set up as well,” said Rhys. “So, we have developed our own in-house service.
“We just create the bolus on the treatment planning system and then the printer basically prints exactly what we designed. As it is an exact copy of what we want, it fits onto the shell like a jigsaw piece.
“The main advantage is the improved accuracy and improved confidence that what we have planned on the system is in the exact same place.
“Because, with the old method, forgetting all the air gaps, we were not that confident in how we were positioning it as well. There were so many steps where errors could be introduced, but this has negated most of them.
“We’ve reduced staff time as well, so we have made the process a lot more efficient.
“Some of these boluses take one to two days to print. But that’s not staff time. We just set it to go ahead and then come back when it is finished, and it frees up your time for other things.”
Senior radiographer Catherine Davies said the move to 3D printed boluses had been a positive step for patients and for staff.
“For staff, this bolus is easier and quicker to fit, is unbreakable and is shown on our daily patient scans to adhere perfectly to where it is intended – and stays there,” she added.
“Patients benefit from the quicker application as they are on the bed for that little bit less.
“They also tell us they do not feel it being placed on the treatment shell, as this new type of bolus does not require moulding to the shell.”
Singleton-based consultant clinical oncologist Russell Banner said the team at the South West Wales Cancer Centre had always used innovative solutions to improve patient care.
“The 3D printing has enabled highly accurate and quality assured boluses to be produced from 3D planning scans, minimising uncertainty and bringing the dose to exactly where we need it,” he said.
“The printer even prints overnight while we are sleeping to ensure there are no delays in the treatment pathway.”
(Lead image: Swansea Bay NHS)
Council appoints new Copr Bay contractor
Enforcement officers issue 600 penalty notices in just over a month targetting environment crime
Housebuilder launches consultation on 500-home zero-carbon ready scheme in Pontarddulais
Landmark anniversary for club which provides support for young burns victims
Former Penlan district housing office transformed into flats
Council issues ‘call for sites’ as it looks to build new development plan
Triple injury blow for Swans ahead of Millwall clash
Baked beans lead the way as the favourite kitchen staple in Wales but items once found in grandparents’ cupboards are dying out
Birth centre and home birth services to be reinstated after £750,000 investment
Swansea-based local energy company generates £35k benefit for community
New Trade Park set to open in Llansamlet
Rhossili named among world’s best beaches
Port Talbot and Morriston Wilko stores first to shut as administrator announces 52 closures
Administrators announce closure dates for Wilko stores in Bridgend, Maesteg and Llanelli
Closure dates announced for Wilko stores in Swansea, Neath and Carmarthen
Poundland to buy 71 Wilko stores – including Pembroke Dock and Ammanford
Melyn Musical Theatre Company celebrates 100th anniversary with spectacular, sold-out Centenary show ‘Kinky Boots’
Poundstretcher to open new Llansamlet store
Swansea Ex-Royal Navy Engineer celebrates first year in business after return to city
Car parking to get more expensive in Neath Port Talbot after councillors agree raft of increases
Arts and Entertainment4 days ago
Bronze statue of entertainer Max Boyce is set to be unveiled at his beloved Glynneath
South Wales Police4 days ago
Man charged with murder after Sketty Lane car fire incident
Rugby5 days ago
Wales 40-6 Australia: Wonderful Wales hammer Australia to seal last eight spot
Business5 days ago
B&M’s ‘bigger and better’ Llanelli store a hit with shoppers on opening weekend
Glynneath5 days ago
Council asks for views on Pontneddfechan development at gateway to waterfalls
Music3 days ago
Shaun Ryder – rock’n’roll wild man heads to Port Talbot as part of major UK tour
Football7 days ago
Swans ease pressure on Duff with Sheffield Wednesday victory
Rugby3 days ago
Gilpin cast’s doubts over Rugby World Cup free-to-air future coverage